Freză de alezat plăci 18500 x 4500 cu 180 mmSCHIESS FRORIEP
1FB 180
Freză de alezat plăci 18500 x 4500 cu 180 mm
SCHIESS FRORIEP
1FB 180
Anul fabricației
2006
Condiție
Folosit
Locație
Babberich 

Afișați imaginile
Arată harta
Date despre mașină
- Descrierea mașinii:
- Freză de alezat plăci 18500 x 4500 cu 180 mm
- Producător:
- SCHIESS FRORIEP
- Model:
- 1FB 180
- Anul fabricației:
- 2006
- Condiție:
- bun (folosit)
PREȚ ȘI LOCAȚIE
- Locație:
- Transito 21, 6909 DA Babberich, NL
Apelați
DETALIILE OFERTEI
- ID-ul listei:
- A895-7438
- Număr de referință:
- 6675
- Ultima actualizare:
- pe 07.03.2024
DESCRIERE
Make: SCHIESS FRORIEP
Type: 1FB180
Control: HeidenHain iTNC 530
Year: 2006
Hydrostatic guideways
Hydrostatic spindle bearing
Pick place head change station
1 = Facing head with U-Axis
2 = Universal milling head
3 = Boring Spindel support
4 = Vertical milling head
Specifications
Metric US Standard
X - Travel
18500 mm
Y - Travel
4500 mm
Z - Travel
950 mm
W - Travel
900 mm
Table Length
Cro8U0Fah8
20000 mm
Table Width
4200 mm
Table load
15000 / Mtr
Speeds / ranges
1000 Rpm
Power
85 kW
Ram size
400 x 340 mm
Spindle Taper
Iso 60/50 ISO/Bt/Mk
Feed rate X-Axis
5600 mm/min.
Feed rate Y-Axis
5600 mm/min.
Feed rate Z-Axis
5600 mm/min.
Feed rate W-Axis
5600 mm/min.
ATC Toolchanger
60
Number of controlled axis
4
Dimensions (Estimate)
Length
26000 mm
Width
12000 mm
Height
7000 mm
Weight
110000 kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
Type: 1FB180
Control: HeidenHain iTNC 530
Year: 2006
Hydrostatic guideways
Hydrostatic spindle bearing
Pick place head change station
1 = Facing head with U-Axis
2 = Universal milling head
3 = Boring Spindel support
4 = Vertical milling head
Specifications
Metric US Standard
X - Travel
18500 mm
Y - Travel
4500 mm
Z - Travel
950 mm
W - Travel
900 mm
Table Length
Cro8U0Fah8
20000 mm
Table Width
4200 mm
Table load
15000 / Mtr
Speeds / ranges
1000 Rpm
Power
85 kW
Ram size
400 x 340 mm
Spindle Taper
Iso 60/50 ISO/Bt/Mk
Feed rate X-Axis
5600 mm/min.
Feed rate Y-Axis
5600 mm/min.
Feed rate Z-Axis
5600 mm/min.
Feed rate W-Axis
5600 mm/min.
ATC Toolchanger
60
Number of controlled axis
4
Dimensions (Estimate)
Length
26000 mm
Width
12000 mm
Height
7000 mm
Weight
110000 kg
Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!
FURNIZOR
Persoană de contact: Dl Mach4Metal Mach4Metal
Transito 21
6909 DA Babberich, Olanda
+31 316 4... arată
Înregistrat din: 2008
Arată mai mult

Mach4Metal ist spezialisiert auf den Kauf und Verkauf von gebrauchten Metallbearbeitungsmaschinen für die Industrie. Wir bieten eine große Auswahl von Maschinen und ähnlichen Bereichen an, einschließlich CNC-Bearbeitungszentren, Fräsmaschinen, Blechbearbeitungsmaschinen, Spannvorrichtungen und anderen Kategorien.
Über uns
Mach4Metal ist spezialisiert auf den Kauf und Verkauf von gebrauchten Metallbearbeitungsmaschinen für die Industrie. Wir bieten eine große Auswahl von Maschinen und ähnlichen Bereichen an, einschließlich CNC-Bearbeitungszentren, Fräsmaschinen, Blechbearbeitungsmaschinen, Spannvorrichtungen und anderen Kategorien.
Geschichte
Mach4Metal wurde 1992 als Handelsunternehmen für gebrauchte Metallbearbeitungsmaschinen gegründet. Im Laufe der Jahre hat sich das Unternehmen zu einem weltweit führenden Unternehmen für gebrauchte Metallbearbeitungsmaschinen und verwandten Kategorien entwickelt. Wir sind ein angesehenes Mitglied zahlreicher Gewerkschaften weltweit.
Ruf
Derzeit verkaufen wir mehr als 500 Maschinen pro Jahr. Gewährleistet wird dies durch mehr als 6.000 unserer zufriedenen Kunden. Wir erhalten viele positive Google-Bewertungen und sorgen dafür das unser guter Ruf weiter bestehen bleibt.
Lage
Mach4Metal liegt zentral in Babberich, Niederlande, Europa, nahe der deutschen Grenze. Flughäfen, Bahnhöfe und Autobahnen befindet sich alles in unserer Nähe. Schauen Sie für nähere Informationen auf unsere Seite mit den Reiseinformationen.
Maschinen Bestand
Wenn Sie nach einer gebrauchten Metallbearbeitungsmaschine suchen, können Sie aus unserem täglich wechselnden Lagerbestand von mehr als 250 gebrauchten Qualitäts Maschinen wählen.
Bei uns finden Sie die besten Marken von CNC-gesteuerten Maschinen und conventionellen, die Ihnen von unseren eigenen Mitarbeitern vorgeführt werden können.
Dienstleistungen
Wir bieten Ihnen eine Gesamtlösung:
Bei Bedarf organisieren wir die Demontage, den richtigen Transport, und liefern die Maschine an den endgültigen Bestimmungsort. Wir kümmern uns dabei auch um Exportpapiere, Zollformalitäten, Versicherungen, CMR und andere notwendige Papiere.
Einkauf
Wir sind ständig am Kauf gebrauchter Maschinen und ähnlichen Produkten interessiert. Wir bieten Ihnen einen attraktiven wettbewerbsfähigen Preis und zahlen im Voraus per Banküberweisung. Darüber hinaus kümmern wir uns um die Demontage und den Transport von jedem Ort aus wo Sie die Maschine auch befindet.
Lagerhäuser
Unser Bestand ist in 7 Hallen mit einer Gesamtfläche von 40.000 m2 gelagert. Die Brückenkrane haben eine Tragfähigkeit von bis zu 85 Tonnen. Hier werden die Maschinen zum Verkauf vorbereitet und gegebenenfalls repariert.
Beratung
Mit unserem Wissen und unserer jahrelangen Erfahrung helfen wir Ihnen gerne mit kompetenter Beratung beim Kauf einer gebrauchten Maschine oder anderen Angelegenheiten. Wir freuen uns, Sie als einen unserer weltweiten Kunden begrüßen zu dürfen!
Über uns
Mach4Metal ist spezialisiert auf den Kauf und Verkauf von gebrauchten Metallbearbeitungsmaschinen für die Industrie. Wir bieten eine große Auswahl von Maschinen und ähnlichen Bereichen an, einschließlich CNC-Bearbeitungszentren, Fräsmaschinen, Blechbearbeitungsmaschinen, Spannvorrichtungen und anderen Kategorien.
Geschichte
Mach4Metal wurde 1992 als Handelsunternehmen für gebrauchte Metallbearbeitungsmaschinen gegründet. Im Laufe der Jahre hat sich das Unternehmen zu einem weltweit führenden Unternehmen für gebrauchte Metallbearbeitungsmaschinen und verwandten Kategorien entwickelt. Wir sind ein angesehenes Mitglied zahlreicher Gewerkschaften weltweit.
Ruf
Derzeit verkaufen wir mehr als 500 Maschinen pro Jahr. Gewährleistet wird dies durch mehr als 6.000 unserer zufriedenen Kunden. Wir erhalten viele positive Google-Bewertungen und sorgen dafür das unser guter Ruf weiter bestehen bleibt.
Lage
Mach4Metal liegt zentral in Babberich, Niederlande, Europa, nahe der deutschen Grenze. Flughäfen, Bahnhöfe und Autobahnen befindet sich alles in unserer Nähe. Schauen Sie für nähere Informationen auf unsere Seite mit den Reiseinformationen.
Maschinen Bestand
Wenn Sie nach einer gebrauchten Metallbearbeitungsmaschine suchen, können Sie aus unserem täglich wechselnden Lagerbestand von mehr als 250 gebrauchten Qualitäts Maschinen wählen.
Bei uns finden Sie die besten Marken von CNC-gesteuerten Maschinen und conventionellen, die Ihnen von unseren eigenen Mitarbeitern vorgeführt werden können.
Dienstleistungen
Wir bieten Ihnen eine Gesamtlösung:
Bei Bedarf organisieren wir die Demontage, den richtigen Transport, und liefern die Maschine an den endgültigen Bestimmungsort. Wir kümmern uns dabei auch um Exportpapiere, Zollformalitäten, Versicherungen, CMR und andere notwendige Papiere.
Einkauf
Wir sind ständig am Kauf gebrauchter Maschinen und ähnlichen Produkten interessiert. Wir bieten Ihnen einen attraktiven wettbewerbsfähigen Preis und zahlen im Voraus per Banküberweisung. Darüber hinaus kümmern wir uns um die Demontage und den Transport von jedem Ort aus wo Sie die Maschine auch befindet.
Lagerhäuser
Unser Bestand ist in 7 Hallen mit einer Gesamtfläche von 40.000 m2 gelagert. Die Brückenkrane haben eine Tragfähigkeit von bis zu 85 Tonnen. Hier werden die Maschinen zum Verkauf vorbereitet und gegebenenfalls repariert.
Beratung
Mit unserem Wissen und unserer jahrelangen Erfahrung helfen wir Ihnen gerne mit kompetenter Beratung beim Kauf einer gebrauchten Maschine oder anderen Angelegenheiten. Wir freuen uns, Sie als einen unserer weltweiten Kunden begrüßen zu dürfen!
Afișați informații juridice suplimentare
Article 1 Definitions
The terms used in these general terms and conditions are defined as follows:
General Terms and Conditions: the Terms and Conditions listed below
Seller: MACH 4 METAL B.V.
Buyer: Any natural or legal person who purchases Products from Seller, or with whom Seller enters into an Agreement, or with whom Seller is currently negotiating in order to enter into an Agreement.
Products: All goods Seller will supply or has supplied pursuant to the Agreement.
Quotation: The offer made by Seller.
Agreement: Any Agreement with regard to the sales and delivery of Products by Seller, any supplement or alteration to said contract, as well as all legal acts in the preparation or for the execution of the Agreement.
Parties: Seller and Buyer are jointly referred to as the Parties.
Article 2 Applicability
1. These General Terms and Conditions apply to all (price) Quotations Seller makes and all Agreements between Parties.
2. Seller explicitly rejects all alterations and/or additions to these General Terms and Conditions, unless they were validated and accepted in writing. Furthermore, Seller explicitly rejects the applicability of Buyer’s Sales Conditions and/or general terms and conditions, unless these were validated and accepted in writing.
3. Should one or multiple provisions, or parts thereof, as recorded in these General Terms and Conditions be nullified or be determined to be invalid in any other way, this will not affect the validity of the other general terms and conditions. In that event Buyer is obligated to agree to one or multiple substitute stipulations, which will resemble the original provision(s) as closely as possible in both purpose and tenor.
Article 3 Establishment of the Agreement
1. Any Quotations and (price) tenders made by Seller shall remain free of engagement. Seller may revoke its Quotations at all times, even when a fixed acceptance term is listed in the Quotation. Buyer’s request for a Quotation or the placement of an order without prior Quotation, will be regarded a request for the production of a Quotation.
2. Data as well as information which are included in Quotations, images, catalogues, technical drawings, advice, and any other provided - subsequent - information, explicitly do not bind Seller.
3. All intellectual property rights with regards to the drawings and/or images presented as part of the offer, rest with Seller. Buyer is not allowed to multiply, publicise or copy any images or drawings without prior written permission.
4. Agreements are established by either an order confirmation or an invoice (should this precede the order confirmation) sent by Seller to Buyer.
Article 4 Prices
1. Prices are expressed in Euros and are, unless otherwise specified, exclusive of VAT, other taxes or surcharges, packing/packaging, and transport costs, as it is where it is.
2. Should one or more of the cost factors be altered after the date of the Quotation but before delivery, Seller is entitled to adjust the agreed on price accordingly, this also applies to binding quotations.
Article 5 Payment
1. Payment shall be made within 48 hours after the invoice date, unless otherwise agreed in writing. Payment should be effectively made in the agreed upon currency. Buyer cannot claim settlement and/or deferment.
2. Prior to the observance of its obligations pursuant to the Agreement, Seller is entitled to request proper security to support Buyer’s payment obligations. Buyer’s refusal to provide the requested security entitles Seller to annul the Agreement(s) in writing or - as is its prerogative- to suspend its obligations.
3. Should Buyer not make payment within the agreed on term, he is deemed to be in immediate default which entitles Seller to increase the amount due with either a default interest of 5% per month or the statutory commercial interest rate under article 6:119a BW (Dutch Civil Code), starting on the invoice date (a part of the month counting as a whole), of the gross invoice amount up until the time of full payment.
4. Should Buyer not meet its (payment)obligations, he is obligated to reimburse all (collecting)fees to Seller.
5. In contravention to paragraph 1, payment will be immediately due when the agreed on price (or part thereof) is not paid promptly, when Buyer is in a state of bankruptcy or equal circumstances, requests moratorium, when legal restraint or administration is requested, or when any attachment is placed on Buyer’s property or receivables.
Article 6 - Delivery
1. The delivery period provided by Seller is indicative only. The exceeding of the delivery period will not lead to Seller’s liability without factual proof of default.
2. Delivery of the Products will be made, unless otherwise agreed, ex works. The Products are deemed to be delivered once they have been offered by Seller to Buyer at the agreed on time and location for the first time.
3. Buyer is obligated to take possession of the Products on the agreed on time and place. Any transportation, storage or additional costs relating to Buyer’s not (timely) taking possession of the Products, will be at Buyer’s expense.
4. The risk of the Products transfers, regardless of the actual delivery, to Buyer upon the conclusion of the Agreement.
5. Should Buyer request delivery prior to the lapse of the agreed on delivery time, and to the extent to which such is feasible, all subsequent additional costs Seller incurs are at Buyer’s expense.
Article 7 Retention of Title and Claims
1. The ownership of the Products only transfers to Buyer, regardless of the actual delivery, after all claims Seller has pursuant to the Agreement or any other agreement, on Buyer in exchange for the delivered or deliverable Products, as well as claims with regard to any default in the execution of said agreements, have been settled.
2. Buyer is not entitled to transfer, pledge, encumber, process or in any way dispose of any Products still belonging to Seller, with the exception of actions which are part of Buyer’s normal work or company practice.
3. Should Buyer fail to meet the obligations pursuant to the Agreement or otherwise, or should reasonable doubt arise to his doing so in the future, Seller is entitled to remove, or have removed, from Buyer or third parties keeping said Products in storage for Buyer, the delivered Products on which the abovementioned retention of title applies. Buyer is obligated to cooperate with this process in any way.
4. Buyer is obliged to insure any Products delivered under retention of title and to keep them insured against fire, explosion and water damage and against theft and to present the insurance policy for inspection on Seller’s first request.
6. Upon buying, the buyer must inspect the products, after buying the complete risk will go over to the buyer, products are sold: ‘as is, where is ‘
7. Seller is entitled to start its own investigation into the nature, size and cause of the complaint. Under penalty of lapse of his right to claim, all Products relating to the claim made by Buyer, should be carefully stored and be presented to Seller upon first request or be send back to Seller.
8. Claims cannot be made should the defects be caused by everyday wear and tear.
9. Claims cannot be made with regard to defects caused by any external causes and/or Buyer’s actions or failings. In particular, although not exclusively, claims cannot be made should the defects be caused by improper or careless use and/or storage; heavy loading or unprofessional maintenance; repairs, alterations or removal carried out without explicit approval; non-compliance with the user and maintenance guidelines.
10. Claims cannot be made when the fact that the product does not meet its expectation is the result of any government requirements with regards to the nature or quality of the applied construction or materials. In the event of a change in the current technical opinions in the work field or to the relevant government requirements, a default cannot be attributed to Seller solely on that basis and Buyer is not entitled to make a claim solely as a result of this.
Should Buyer make a claim in compliance with the aforementioned, and should this claim be deemed just by Seller, Seller shall, as is its prerogative, determine whether to replace the affected goods or their affected parts, or reimburse them.
Article 8 - Force Majeure
1. Seller is not obligated to observe its obligations should he be hindered as a result of circumstances beyond his control for which he cannot lawfully, legally or socially be held accountable.
2. In these General Terms and Conditions force majeure comprises of all it includes pursuant to law and jurisprudence, as well as all external causes, whether foreseen or unforeseen, on which Seller has no influence, yet which prevent Seller from meeting his obligations, for instance, though not limited to, strikes at Seller’s company.
Article 9 Liability
1. Buyer is entitled to inspect the Products for any defects prior to purchase. The Products are sold and delivered ‘as is, where is’ at the time of the sale, without any warranty and with the exclusion of the provisions listed in article 7:15 and 7:17 BW (Dutch Civil Code), unless explicitly agreed otherwise. Therefore, Seller is not liable for any known or unknown defaults.
2. Seller is not liable towards Buyer with regard to the presence or absence of a CE marking.
3. Seller is not liable for any direct or indirect damage Buyer suffers, explicitly including although not limited to a loss of profits, loss of income, costs incurred during laying up, consequential loss, bodily injury, all forms of financial loss, as well as any claims by third parties, save in the event of intent or conscious recklessness on the side of Seller or by anyone part of Seller’s management.
4. Furthermore, any liability Seller might have in any circumstance, is limited to the damage covered and actually paid out by its insurance company with a maximum of the covered amount in such events.
5. Moreover, Seller shall, without prejudice to the abovementioned, never be held to any reimbursement of damages in the event the amount of the damage exceeds the amount invoiced by Seller for the Products to which the damage directly relates, exclusive of VAT and any other government levies.
Article 10 Disputes and Applicable Law
1. Dutch law shall exclusively govern all Agreements between Parties which are subject to these General Terms and Conditions. The application of the Vienna Sales Convention is expressly excluded.
2. Any disputes between Parties will be filed with the competent judge in the Arnhem district (in the Netherlands).
The terms used in these general terms and conditions are defined as follows:
General Terms and Conditions: the Terms and Conditions listed below
Seller: MACH 4 METAL B.V.
Buyer: Any natural or legal person who purchases Products from Seller, or with whom Seller enters into an Agreement, or with whom Seller is currently negotiating in order to enter into an Agreement.
Products: All goods Seller will supply or has supplied pursuant to the Agreement.
Quotation: The offer made by Seller.
Agreement: Any Agreement with regard to the sales and delivery of Products by Seller, any supplement or alteration to said contract, as well as all legal acts in the preparation or for the execution of the Agreement.
Parties: Seller and Buyer are jointly referred to as the Parties.
Article 2 Applicability
1. These General Terms and Conditions apply to all (price) Quotations Seller makes and all Agreements between Parties.
2. Seller explicitly rejects all alterations and/or additions to these General Terms and Conditions, unless they were validated and accepted in writing. Furthermore, Seller explicitly rejects the applicability of Buyer’s Sales Conditions and/or general terms and conditions, unless these were validated and accepted in writing.
3. Should one or multiple provisions, or parts thereof, as recorded in these General Terms and Conditions be nullified or be determined to be invalid in any other way, this will not affect the validity of the other general terms and conditions. In that event Buyer is obligated to agree to one or multiple substitute stipulations, which will resemble the original provision(s) as closely as possible in both purpose and tenor.
Article 3 Establishment of the Agreement
1. Any Quotations and (price) tenders made by Seller shall remain free of engagement. Seller may revoke its Quotations at all times, even when a fixed acceptance term is listed in the Quotation. Buyer’s request for a Quotation or the placement of an order without prior Quotation, will be regarded a request for the production of a Quotation.
2. Data as well as information which are included in Quotations, images, catalogues, technical drawings, advice, and any other provided - subsequent - information, explicitly do not bind Seller.
3. All intellectual property rights with regards to the drawings and/or images presented as part of the offer, rest with Seller. Buyer is not allowed to multiply, publicise or copy any images or drawings without prior written permission.
4. Agreements are established by either an order confirmation or an invoice (should this precede the order confirmation) sent by Seller to Buyer.
Article 4 Prices
1. Prices are expressed in Euros and are, unless otherwise specified, exclusive of VAT, other taxes or surcharges, packing/packaging, and transport costs, as it is where it is.
2. Should one or more of the cost factors be altered after the date of the Quotation but before delivery, Seller is entitled to adjust the agreed on price accordingly, this also applies to binding quotations.
Article 5 Payment
1. Payment shall be made within 48 hours after the invoice date, unless otherwise agreed in writing. Payment should be effectively made in the agreed upon currency. Buyer cannot claim settlement and/or deferment.
2. Prior to the observance of its obligations pursuant to the Agreement, Seller is entitled to request proper security to support Buyer’s payment obligations. Buyer’s refusal to provide the requested security entitles Seller to annul the Agreement(s) in writing or - as is its prerogative- to suspend its obligations.
3. Should Buyer not make payment within the agreed on term, he is deemed to be in immediate default which entitles Seller to increase the amount due with either a default interest of 5% per month or the statutory commercial interest rate under article 6:119a BW (Dutch Civil Code), starting on the invoice date (a part of the month counting as a whole), of the gross invoice amount up until the time of full payment.
4. Should Buyer not meet its (payment)obligations, he is obligated to reimburse all (collecting)fees to Seller.
5. In contravention to paragraph 1, payment will be immediately due when the agreed on price (or part thereof) is not paid promptly, when Buyer is in a state of bankruptcy or equal circumstances, requests moratorium, when legal restraint or administration is requested, or when any attachment is placed on Buyer’s property or receivables.
Article 6 - Delivery
1. The delivery period provided by Seller is indicative only. The exceeding of the delivery period will not lead to Seller’s liability without factual proof of default.
2. Delivery of the Products will be made, unless otherwise agreed, ex works. The Products are deemed to be delivered once they have been offered by Seller to Buyer at the agreed on time and location for the first time.
3. Buyer is obligated to take possession of the Products on the agreed on time and place. Any transportation, storage or additional costs relating to Buyer’s not (timely) taking possession of the Products, will be at Buyer’s expense.
4. The risk of the Products transfers, regardless of the actual delivery, to Buyer upon the conclusion of the Agreement.
5. Should Buyer request delivery prior to the lapse of the agreed on delivery time, and to the extent to which such is feasible, all subsequent additional costs Seller incurs are at Buyer’s expense.
Article 7 Retention of Title and Claims
1. The ownership of the Products only transfers to Buyer, regardless of the actual delivery, after all claims Seller has pursuant to the Agreement or any other agreement, on Buyer in exchange for the delivered or deliverable Products, as well as claims with regard to any default in the execution of said agreements, have been settled.
2. Buyer is not entitled to transfer, pledge, encumber, process or in any way dispose of any Products still belonging to Seller, with the exception of actions which are part of Buyer’s normal work or company practice.
3. Should Buyer fail to meet the obligations pursuant to the Agreement or otherwise, or should reasonable doubt arise to his doing so in the future, Seller is entitled to remove, or have removed, from Buyer or third parties keeping said Products in storage for Buyer, the delivered Products on which the abovementioned retention of title applies. Buyer is obligated to cooperate with this process in any way.
4. Buyer is obliged to insure any Products delivered under retention of title and to keep them insured against fire, explosion and water damage and against theft and to present the insurance policy for inspection on Seller’s first request.
6. Upon buying, the buyer must inspect the products, after buying the complete risk will go over to the buyer, products are sold: ‘as is, where is ‘
7. Seller is entitled to start its own investigation into the nature, size and cause of the complaint. Under penalty of lapse of his right to claim, all Products relating to the claim made by Buyer, should be carefully stored and be presented to Seller upon first request or be send back to Seller.
8. Claims cannot be made should the defects be caused by everyday wear and tear.
9. Claims cannot be made with regard to defects caused by any external causes and/or Buyer’s actions or failings. In particular, although not exclusively, claims cannot be made should the defects be caused by improper or careless use and/or storage; heavy loading or unprofessional maintenance; repairs, alterations or removal carried out without explicit approval; non-compliance with the user and maintenance guidelines.
10. Claims cannot be made when the fact that the product does not meet its expectation is the result of any government requirements with regards to the nature or quality of the applied construction or materials. In the event of a change in the current technical opinions in the work field or to the relevant government requirements, a default cannot be attributed to Seller solely on that basis and Buyer is not entitled to make a claim solely as a result of this.
Should Buyer make a claim in compliance with the aforementioned, and should this claim be deemed just by Seller, Seller shall, as is its prerogative, determine whether to replace the affected goods or their affected parts, or reimburse them.
Article 8 - Force Majeure
1. Seller is not obligated to observe its obligations should he be hindered as a result of circumstances beyond his control for which he cannot lawfully, legally or socially be held accountable.
2. In these General Terms and Conditions force majeure comprises of all it includes pursuant to law and jurisprudence, as well as all external causes, whether foreseen or unforeseen, on which Seller has no influence, yet which prevent Seller from meeting his obligations, for instance, though not limited to, strikes at Seller’s company.
Article 9 Liability
1. Buyer is entitled to inspect the Products for any defects prior to purchase. The Products are sold and delivered ‘as is, where is’ at the time of the sale, without any warranty and with the exclusion of the provisions listed in article 7:15 and 7:17 BW (Dutch Civil Code), unless explicitly agreed otherwise. Therefore, Seller is not liable for any known or unknown defaults.
2. Seller is not liable towards Buyer with regard to the presence or absence of a CE marking.
3. Seller is not liable for any direct or indirect damage Buyer suffers, explicitly including although not limited to a loss of profits, loss of income, costs incurred during laying up, consequential loss, bodily injury, all forms of financial loss, as well as any claims by third parties, save in the event of intent or conscious recklessness on the side of Seller or by anyone part of Seller’s management.
4. Furthermore, any liability Seller might have in any circumstance, is limited to the damage covered and actually paid out by its insurance company with a maximum of the covered amount in such events.
5. Moreover, Seller shall, without prejudice to the abovementioned, never be held to any reimbursement of damages in the event the amount of the damage exceeds the amount invoiced by Seller for the Products to which the damage directly relates, exclusive of VAT and any other government levies.
Article 10 Disputes and Applicable Law
1. Dutch law shall exclusively govern all Agreements between Parties which are subject to these General Terms and Conditions. The application of the Vienna Sales Convention is expressly excluded.
2. Any disputes between Parties will be filed with the competent judge in the Arnhem district (in the Netherlands).
Închide informații juridice suplimentare
Arată mai puțin
Trimiteți solicitarea
TELEFON & FAX
+31 316 4... arată
Aceste reclame ar putea să vă intereseze și pe dumneavoastră.
Anunț clasificat

1.423 km
Strung vertical - o singură coloană
SCHIESS-FRORIEP40Dv - CNC
SCHIESS-FRORIEP40Dv - CNC
Anunț clasificat

809 km
Strung vertical
SCHIESS FRORIEP16 DSC 150P
SCHIESS FRORIEP16 DSC 150P
Anunț clasificat

1.214 km
Furca NC
SCHIESS FRORIEP.....
SCHIESS FRORIEP.....
Anunț clasificat

1.494 km
Strung vertical
SCHIESS FRORIEPDZ 40 U
SCHIESS FRORIEPDZ 40 U
Anunț clasificat

1.419 km
Strung vertical
Fremtas(Schiess-Froriep)20FFR23
Fremtas(Schiess-Froriep)20FFR23
Anunț clasificat

4.960 km
Strung vertical CNC
SCHIESS FRORIEP40 DS 350
SCHIESS FRORIEP40 DS 350
Anunț clasificat

1.363 km
Strung vertical - o singură coloană
SCHIESS-FRORIEP27 DE 250 - Retrofit
SCHIESS-FRORIEP27 DE 250 - Retrofit
Anunț clasificat

1.522 km
Boring mill rotativ și masa de alunecare 45 Ton
SCHIESS FRORIEPDV 45
SCHIESS FRORIEPDV 45
Anunț clasificat

1.494 km
Strung vertical
SCHIESS FRORIEP32 DS 250
SCHIESS FRORIEP32 DS 250
Anunț clasificat

793 km
Schiess Froriep, Poreba, Heckert, FAT
ZF, Stromag, Heid electromagnet clutchesEKR30, EK120z, EKE160, ELN4T, FOV10, FZV
ZF, Stromag, Heid electromagnet clutchesEKR30, EK120z, EKE160, ELN4T, FOV10, FZV
Anunț clasificat

5.668 km
Strung vertical - o singură coloană
SCHIESS-MOWEGKSM 140
SCHIESS-MOWEGKSM 140
Anunț clasificat

1.237 km
CNC mașină de găurit găuri adânci
Froriep/Hellwig961
Froriep/Hellwig961
Anunț clasificat

695 km
Roboți industriali
Schleifzelle mit Roboter Kuka KR 180
Schleifzelle mit Roboter Kuka KR 180
Anunț clasificat

1.442 km
Mașină de imprimare digitală
Xerox Versant 180 Press incl. FieryBookletfinisher, Paperdeck, Trimmer
Xerox Versant 180 Press incl. FieryBookletfinisher, Paperdeck, Trimmer
Anunț clasificat

857 km
Atașament pentru stivuitor
Stapler Euro Drehgerät re.180°FEM2 /2500 rechts
Stapler Euro Drehgerät re.180°FEM2 /2500 rechts
Anunț clasificat

2.439 km
Strung central
SCHIESSTORNO HORIZONTAL DEFRIESS
SCHIESSTORNO HORIZONTAL DEFRIESS
Anunț clasificat

1.899 km
Strung vertical - coloană dublă
SCHIESSKZ300
SCHIESSKZ300
Anunț clasificat

164 km
Freză de alezat de masă
Schiess SmtBMT-130
Schiess SmtBMT-130
Anunț clasificat

1.458 km
Mașină de șlefuit cu traseu curbat CNC
SCHIESS KOPPSK 22
SCHIESS KOPPSK 22
Anunț clasificat

1.442 km
Mașină de imprimare digitală
Xerox Versant 180 Press incl.Fiery, Trimmer, Squarefold
Xerox Versant 180 Press incl.Fiery, Trimmer, Squarefold
Anunț clasificat

1.421 km
Alții
FRORIEPMaschinenbett - Rohling
FRORIEPMaschinenbett - Rohling
Anunț clasificat

2.438 km
Strung vertical robust
SCHIESS18’ VBM
SCHIESS18’ VBM
Anunț clasificat

1.363 km
Strung carusel - cu două coloane
FRORIEPKE 370
FRORIEPKE 370
Anunț clasificat

1.421 km
Alții
FRORIEPReitstock
FRORIEPReitstock
Anunț clasificat

1.421 km
Alții
FRORIEPGegenspindel - Spindelkasten
FRORIEPGegenspindel - Spindelkasten
Anunțul dvs. a fost șters cu succes
A apărut o eroare