Șlefuitor cu bandăLöser
FS384/150-2
Șlefuitor cu bandă
Löser
FS384/150-2
Stare
Utilizat
Locație
Dietzenbach 

Afișați imagini
Afișează harta
Date despre utilaj
- Denumirea mașinii:
- Șlefuitor cu bandă
- Producător:
- Löser
- Model:
- FS384/150-2
- Stare:
- revizuit în atelier (folosit)
Preț și locație
- Locație:
- Siemensstrasse 13 A, 63128 Dietzenbach, Deutschland

Sunați
Detalii tehnice
- Putere:
- 5,5 kW (7,48 CP)
Detalii despre ofertă
- ID anunț:
- A176-80888
- Actualizare:
- ultima dată la 12.11.2024
Descriere
The wet grinding machine with integrated stainless steel drip tray is used for professional processing of square tubes and flat profiles up to 150 mm wide and is suitable for grinding steel, stainless steel and non-ferrous metals.
The machine stand forms a machine unit together with the tool units and the control cabinet.
Key data of the machine:
Passage height (workpiece height): 100 mm
Maximum workpiece width: 150 mm
Sanding belt tension: Manual
Sanding belt dimensions: 2500 mm length x 150 mm width
Tool units
The two tool carriers are designed for the use of sanding belts 150 x 2500 mm. Each unit has a three-phase motor with direct drive. The drive power of each unit is 5.5 KW.
Workpiece transport
The workpieces are transported via an endless belt.
The drive is a variable speed gearbox whose feed (belt speed) is adjustable via a handwheel.
Water tank
Hfodpfx Agsu Nwt Ejbjd
The machine is equipped with a water tank to be placed under the machine. The water is fed from the machine's stainless steel tank after the second station via a funnel into the sedimentation tank. A feed pump, which is located in the drainage basin, pumps the water back to the units.
Anunțul a fost tradus automat. Pot exista erori de traducere.
The machine stand forms a machine unit together with the tool units and the control cabinet.
Key data of the machine:
Passage height (workpiece height): 100 mm
Maximum workpiece width: 150 mm
Sanding belt tension: Manual
Sanding belt dimensions: 2500 mm length x 150 mm width
Tool units
The two tool carriers are designed for the use of sanding belts 150 x 2500 mm. Each unit has a three-phase motor with direct drive. The drive power of each unit is 5.5 KW.
Workpiece transport
The workpieces are transported via an endless belt.
The drive is a variable speed gearbox whose feed (belt speed) is adjustable via a handwheel.
Water tank
Hfodpfx Agsu Nwt Ejbjd
The machine is equipped with a water tank to be placed under the machine. The water is fed from the machine's stainless steel tank after the second station via a funnel into the sedimentation tank. A feed pump, which is located in the drainage basin, pumps the water back to the units.
Anunțul a fost tradus automat. Pot exista erori de traducere.
Furnizor
Notă: Înregistrați-vă gratuit sau conectați-vă, pentru a accesa toate informațiile.
Înregistrat din: 2008
76 Anunțuri online
Trimite solicitare
Telefon & Fax
+49 6074 ... anunțuri
Anunțul dvs. a fost șters cu succes
A apărut o eroare






