Welding and cleaning line

Rotox ROTOX-SMK506-2007

For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam).

The line includes:
● Rotox SMK 506 4K four-head welding machine
● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station
● FIMTEC cooling station

Photos and documents are available at this link:

1. Rotox SMK 506 4K four-head welding machine
● Year of manufacture: 10/2007, machine number: 506 8026
● Fixed side of the machine: right (working direction from right to left)
● Profile arrangement on the table: outer side of the window facing down
Bjdezp Nz Tspfx Agljww
● Weld bead allowance: 6 mm
● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm)
● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm)
● Minimum welding dimension: 320 x 420 mm, with automatic transport
● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm
● Welding of U and T profiles and door frames (C-type welding)
● Heated knives for controlling the weld bead
● Quick replacement of Teflon film
● Machine safety fencing
● Data acquisition system from the welding machine
● Operating counter: approximately 385,000 welding cycles
● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles

2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station
● Year of manufacture: 10/2007, cleaning machine number: 479 6312
● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right
● Fixed side of the machine: right
● Profile arrangement on the table: outer side of the window facing down
● Maximum dimensions of processed frames: 2500 x 2500 mm
● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive
● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing)
● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel
● Operating counter: approximately 9,863,552 cleaned corners
● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska

3. FIMTEC cooling station
● Year of manufacture: approximately 2021–2022
● Purchased from GRAF

Machines are functional, disassembled – not currently in operation – prepared for transport.

Contact:
EUROCOLOR Sp. z o.o.
ul. Toszecka 47, 44-120 Pyskowice

Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Anunțul a fost tradus automat. Pot exista erori de traducere.