Strung automat

HANWHA XD-38II N 828D-SL-Siemens

Special feature: The machine is equipped with a hydraulic 3-jaw chuck on both the main and pick-up spindles.
The machine can be inspected at our premises.

MAIN SPINDLE
Maximum turning diameter: 25 mm
Maximum speed [rpm]: 6,500
Maximum power [kW]: 23 (76 Nm)
C-axis with 0.001°
Stroke Z1 [mm]: Long lathe version 142 mm,
Short lathe version 80 mm
Synchronous guide bush unit
Type of guide bush: SL38
Type of collet chuck: 173E

COUNTER SPINDLE
Maximum speed [rpm]: 6,500
Maximum power [kW]: 23 (76 Nm)
Maximum pick-up diameter [mm]: 25
Max. part length ejection to the front [mm]: 90
C-axis with 0.001°
stroke Z2 [mm]: 280
Type of collet chuck: 171E / 173 E
TOOLING OPTIONS
Tool slide X1,Y1:
- Tool holder plate for 5 external turning tools 16 x 16 mm
Cross drilling/milling device:
- Quantity: 5 driven ER16 drilling/milling spindles
- Power: [kW]: 2.1 (S6000)
- Front drilling unit for 5 drilling quills diameter 32 mm


Rear machining
- Tool carrier for 4 (optionally 6) tools
Hnjdpjrvzdmjfx Aa Rsg
- 2 - 4 driven drilling/milling spindles ER16 modular
- 2 - 4 stationary drilling/milling spindles ER16 modular
Optional Y2 axis
- 4 - 5 driven drilling/milling spindles ER16 modular
- 3 - 4 stationary drilling/milling spindles ER16 modular
TRAVERSING AXES AND CONNECTED LOAD
Number of servo axes: 6
Number of spindle axes: 2
Rapid traverse m/min: 32 m/min (Z1,Z2,Y,X2, Y2) ; 24 m/min (X1)
Connected load [kW]: 35

CONTROL
Control type: Siemens 828 D SL
Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2)
Simultaneous 4-axis control
External control panel with handwheel
10.4" color monitor LCD/MDI
Automatic switch-off function PowerOff
Program check function (test run possible via handwheel)
Continuous thread cutting cycle
Runtime display / parts counter
CF card interface
Tool radius compensation
Absolute reference point
Self-diagnosis function
ACCESSORIES
Alignment shoes with leveling elements
Tool box and service tool set
LED work area light
Signal lamp (3-color)
Safety door switch with interlock
Maintenance and central lubrication unit (1.8 liter
lubricating oil volume)
Coolant flow monitoring
Pneumatic blow-out device for the pick-up spindle gripper
Manual and documentation in German and English

Anunțul publicitar a fost tradus automat și ar putea apărea unele erori de traducere.